Armature Stands
Stainless Steel Armature Stand Fork
Stainless Steel Armature Stand Fork
Stainless steel.
Easily screws on to:

TruForm 18" or 24" back irons
18" Adjustable Armature Stand

Will not fit 16" Steel Armature Stand

Great for water base clay. Will not rust.

6" long fork is 1/4" thick tines
5" long fork is 3/16" thick tines

Note: This is the Fork Only
It does not include a Backiron or base board. Those items must be ordered separate.
5" Fork  
6" Fork  
Steel Armature Stand
Steel Armature Stand
It is 16" tall. Adjustable - up, down, back and forth. Steel all thread. Made in USA.

It will work with the 12", 18" TruForm or Individual armature figures. Attach your own armature as well.

Armature Fork does not fit 16" armature stand.
16" Armature Stand  
Panavise Heavy Duty Base
Enginered to allow the base to support weights up to 75 lbs at 45°.

Accepts any 1" diameter shaft to a depth of 1.7".

Single knob controls head movement through three planes: 90° tilt, 360° turn & 360° rotation.

Square base 4.125" x 4.125" has four mounting holes (mounting screws not included).

Internal half ball can be reversed from positive serrated lock (high holding power) to smooth friction lock (low holding power). Height: 3.25" not including top mount.

Panavise Heavy Duty Base  
Adjustable Armature Stands
Adjustable Armature Stands
Stand is adjustable in all directions and rotates in a complete circle. Versatile enhancement to any armature system.
Armature Stand
"18", and 24" stands have a 1/2" all thread rod attached to a 4" x 6" metal base and a 1/2" rotating all thread rod. The Heavy Duty 24" stand has a 3/4" all thread rod attached to a 6" x 6" metal base and a 1/2" rotating all thread rod.

Armature Stand All of the adjustable armature stands are compatible with the TruForm individual armatures and the almaloy individual figure armatures.

Heavy Duty 24"  
Panavise Heavy Duty Fixturing Head
Panavise Heavy Duty Fixturing Head
A rugged Fixturing Head for heavy duty projects!
  • Four "universal" slots 0.29" (7.37mm) wide for attaching forms, parts, etc...
  • Flat Head is 3" x 6" (76.2mm x 152.4mm)
  • Shaft is 1" (25.4mm) in diameter and 3.25" (82.5mm) long. Shaft is drilled and tapped 1/4-20 (screw included) for permanently securing to base
  • Height (bottom of shaft to top of head): 4" (101.6mm)
Panavise Heavy Duty Fixturing Head  
TruForm Backirons
TruForm Backirons